A methacrylate-based chemical anchor without styrene for medium-high loads. Suitable for anchoring threaded rods and bolts in solid or hollow surfaces of concrete, bricks, stones and woods. Can be applied on wet concrete and in flooded holes (reduction of the proposed load by 20%). Can be used to repair or fill in concrete surfaces. Due to the absence of styrene, it has a mild odor and can be applied indoors. Can be used in hollow materials as well, using appropriate plastic cases. Fast drying, easy to use; requires no pre-mixing of the two components. Applied with a simple silicone gun. It’s thixotropic and doesn’t sag.
Methacrylate based chemical anchor for medium / high loads
APPLICATIONS:
Suitable for anchoring in the construction sector (buildings, industrial, infrastructure) and in electrical or hydraulic applications. Can be applied on concrete (C20/25), stones, solid bricks, hollow bricks, etc.
PACKAGING:
-300 ml Cartridges (Box of 15)
SHELF LIFE:
At least 12 months from date of manufacture when stored in room temperature and indoor humidity (not below 0℃ and over 25℃).
| Technology | One Component |
|---|---|
| Type | Anchoring |
| Materials | Bricks, Concrete, Marble, Plastic |
| Conditions | Indoor, Outdoor |
| Application areas | Buildings, Industrial |
© 2026 Elastotet. All Rights Reserved. Powered by iTeamSupport
