Description
Silane terminated polymer technology sealant and adhesive
APPLICATIONS:
Ideal for fixing, sealing and bonding on almost all construction materials. An advanced technology product (all in one), which can substitute silicones, acrylic and PU based sealants, as well as structural adhesives, wood glues, fastening glues, etc. Suitable for sealing joints in all types of frames, roofs, floors, hydraulic pipes, ventilation systems, etc. Due to its high mechanical strength and permanent elasticity, it’s ideal for bonding between heterogeneous materials, where mechanical loads are developed. Indicatively, it’s recommended for bonding mirrors, tiles, bathroom accessories, sinks, gypsum boards, decorative items, metal frames, sills, etc.
PACKAGING:
-280 ml Cartridges (Box of 12)
COLORS:
White
SHELF LIFE:
At least 12 months from date of manufacture when stored in room temperature and indoor humidity (not below 0℃ and over 25℃).
FAQS about ADHESIVES IN GENERAL
What is mounting adhesive?
Mounting adhesives are high-viscosity (thick) and thixotropic (self-supporting, non-flowing) adhesives used for a wide range of applications, including mounting, hanging, and suspending objects, as well as replacing screws, plugs, or nails.
Their main advantages over nails or screws are that they don’t require drilling into the object or substrate and they distribute the load across the entire contact surface,
unlike screws or nails, which concentrate the load at specific points.
They are typically offered in 300 ml plastic cartridges for application with a gun or in 80-200 ml tubes for hand application (similar to silicones). There are various types of mounting adhesives with different chemistries and drying methods.
What is the difference between Montage Stick, Montage S, Lastostick, Elastobond and Elastobond High Tack?
The products listed are all mounting adhesives with distinct characteristics:
Montage Stick:
A mounting adhesive that dries by evaporating the water it contains.
- Low cost
- Suitable for sensitive substrates, such as expanded polystyrene (styrofoam)
- Difficult to dry between non-porous substrates; at least one of the surfaces should be porous
- Moderate adhesion on fairly smooth substrates
Montage S:
A mounting adhesive that dries through the evaporation of solvents it contains.
- Suitable for both porous and non-porous substrates
- Not suitable for solvent-sensitive substrates, such as Styrofoams
Lastostick:
A polyurethane adhesive that cures with the humidity of the air or substrate.
- Suitable for both porous and non-porous substrates
- Bonds even to wet surfaces
- Fast curing
- Moisture on the substrate accelerates the curing process
- May exhibit some mild swelling during drying, which is generally undesirable
Elastobond:
A moisture-curing adhesive based on silane-terminated polymers.
- Suitable for both porous and non-porous substrates
- Bonds even to wet surfaces
- Moisture on the substrate accelerates the curing process
- Doesn’t swell during drying
- Elastic
Elastobond Hi Tack:
This is a modified version of Elastobond with particularly high viscosity (thick consistency).
- The high viscosity allows it to support heavy objects without the need for temporary support (such as double-sided tape), until the adhesive fully cures.
- The adhesive’s high viscosity creates a “suction cup” effect, enabling it to hold loads effectively even when fresh.
- Due to its high viscosity, it requires a special heavy-duty silicone gun for application and cannot be used with thin cartridges.
SEALANT ADHESIVES COMPARATIVE TABLE
SEALANT ADHESIVES APPLICATIONS TABLE
